huaihai drying
Focus on the manufacture and service of drying equipment
Searches: dryers, granulators, mixers
QG series pulse airflow dryer
Specifications | QG-50 | QG-100 | QG-250 | QG-500 | QG-1500 | |
Water evaporation | kg/h | 50 | 100 | 250 | 500 | 1500 |
air filter | area(m2) | 4 | 6 | 18 | 36 | 60 |
Number of units | 1 | 1 | 1 | 2 | 2 | |
Replacement time(h) | 200(Filter bag) | 200(Filter bag) | 200(Filter bag) | 200(Filter bag) | 200(Filter bag) | |
Heater | area(m2) | 30 | 43 | 186 | 365 | 940 |
Consumption of steam(kg) | 120 | 235 | 450 | 972 | 2430 | |
Work pressure(Mpa) | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
Fan | model | 9-19-4.5 | 9-26-4.5 | 9-19-9 | 9-19-9 | 9-26-6.3 |
Number of units | 1 | 1 | 1 | 2 | 4 | |
power(kw) | 7.5 | 11 | 18.5 | 37 | 125 | |
Feeder | Delivery volume(kg/h) | 150 | 290 | 725 | 1740 | 4350 |
way to control | Electromagnetic speed regulating motor | Electromagnetic speed regulating motor | Electromagnetic speed regulating motor | Electromagnetic speed regulating motor | Electromagnetic speed regulating motor | |
power(kw) | 0.6 | 1.1 | 3 | 3 | 7.5 | |
Cyclone separator | model | CLK-350-400 | CLK-500-450 | ZF12.5 | ZF12.5 | |
effectiveness(%) | 98 | 98 | 98 | 98 | ||
Quantity | 2 | 2 | 2 | 3 | ||
Bag filter | Quantity | 1 | 1 | 1 | 1 | 1 |
Water Consumption | 3.6-20.0 |
JGSeries air dryer
working principle
The JG series of airflow dryers remove moisture (mainly surface moisture) from easily dehydrated granules and powdered materials. In the airflow drying, the quality of the dried product is better controlled due to the short residence time of the material in the dryer. The enhanced airflow drying of our factory is composed of a set of intensifiers whose speed can be adjusted steplessly. The wet material enters the intensifier through the screw feeder and is fully mixed with the hot air flow, crushing and propelling in the fast rotating knife. Next, the material is broken into fine particles, which are moved to the outlet while drying, and then enter the drying tube under the attraction of the wind to further uniformly dry. Wet heavy particles that cannot be attracted by the wind continue to be crushed and dried until they can be sucked up by the wind into the drying tube.
The main purpose
This machine is especially suitable for materials with large moisture content, wet materials, and can not be dried by other airflow drying methods, such as white carbon black, copolymer of vinyl acetate and vinyl chloride, cellulose acetate floc, catalyst, CMC. , CT-1 resin, wrought gypsum, electrolytic manganese dioxide, ammonium sulfonate, fluorspar, diatomaceous earth, silica gel catalyst, bone powder, high territory, potassium perchlorate sulfonamide, synthetic resin, active gluten, activity White clay, chemical filter cake, rutile type white powder, azelaic acid, copper sulfate, aluminum sulfate, sodium sulfate, calcium phosphate, phosphate esterified starch, dye, calcium citrate, slime, dough-shaped bread, rice bran, clay , clay cement, urea, bentonite, spherical clay, aluminum hydroxide, barium hydroxide, calcium lactate, food, washed high territory, cyanuric acid, gypsum paddle, lime, biological products, carbon black, calcium carbonate slurry, sludge Slag, organic chemicals aluminum stearate, iron oxide, organic fuel, corn protein feed, wet mud, mica powder, pharmaceuticals, pigments, potassium dichromate pulp, distiller's residue.
Technical specifications
model |
Evaporated water kg/h (calculated as surface moisture) |
Installed power kw | Floor aream2 | height m |
JG 50 | 50 | 10 | 20 | 9 |
JG 100 | 100 | 20 | 32 | 11 |
JG 200* | 200 | 31 | 40 | 11 |
JG 250 | 250 | 32 | 64 | 13 |
JG 500* | 500 | 54 | 96 | 13 |
JG 1000* | 1000 | 135 | 120 | 15 |
JG 1500* | 1500 | 175 | 200 | 16 |
Note: Those with * are for secondary drying, installed power, and floor space calculated by steam heating. |
FG series airflow dryer
working principle
The working principle of the FG series airflow dryer is to divide the drying of wet materials into two steps. The raw material is firstly dried by the first-stage positive pressure by the mixture of the secondary dry exhaust gas and the supplementary hot gas, and the used high-temperature low-humidity exhaust gas is discharged outside the machine, and the dried semi-finished product is subjected to secondary negative pressure drying by fresh hot air. Finished metering package after drying. The used high-temperature and low-humidity exhaust gas is used as the first-stage drying to complete a good cycle drying process, and the supplementary hot air volume can be adjusted as needed, so that the machine has wide applicability.
Adaptable material
This equipment is widely used in the drying of powdery and granular materials in food, chemical, pharmaceutical, building materials and other industries. The products that have been dried in this series are: starch, glucose, fish meal, sugar, sugar, wine trough, feed, gluten, plastic resin, coal powder, dyes, etc.
Technical specifications
model | Evaporation of water (kg/h) | Installed power kw | Floor area m2 | Thermal efficiency (%) |
FG0.25 | 113 | 11 | 3.5x2.5 | >60 |
FG0.5 | 225 | 18.5 | 7x5 | >60 |
FG0.9 | 450 | 30 | 7x6.5 | >60 |
FG1.5 | 675 | 50 | 8x7 | >60 |
FG2.0 | 900 | 75 | 11x7 | >60 |
FG2.5 | 1125 | 90 | 12x8 | >60 |
FG3.0 | 1150 | 110 | 14x10 | >60 |
FG3.5 | 1491 | 110 | 14x10 | >60 |
Contact :Mr.Zhang 0086-18651238882
Telephone:0086-0519-81236002
Fax:0086-0519-81236260
E-mail:huaihaidry@sina.com
Address : Moujia Industrial Park, Zhenglu Town, Changzhou City